There Is A Start Button and Stop Button for Rotation of Three-Phase AC Motor, Pulleys and Belt Helps Rotate The Metal Shaft which is covered with Polyamide Material Sleeves In Order To Enlarge The Lifetime of The Round Knife
There Is Needles On the Metal Shaft
Operator Lockes the Core to the Needles of the Metal Shaft
When the Motor Rotates the Metals Shaft, It Rotates The Core ( Which Is Locked To The Needles on the Shaft ) too.
There is a round cutting knife for cutting operation.
Cutting Opeartion Is Done Manually By Pressing The Round Knife Handle In Order The Round Knife will Touch To The Core Surface.
The Core Cutting Thickness is Up to 15 mm On One Side Possible.
There is Mechanical Limiter To Prevent The Polyamide From Being Damaged During The Cutting Process.
Cutting Depth of the Round Knife to Poliamide is tunely adjustable.
There is a Spring That Pushes The Blade Back After Cutting Operation
Cutting Area Position is selected manually too.
Cutting Area Width Is 80 cm Wide.
Mechanical Support with wheels ( From Below) To prevent Long And Therefore Heavy Cores From Sagging